Racking Permits in Toronto: What Industrial Tenants Need
November 22, 2026

Racking Permits in Toronto: What Industrial Tenants Need

By Michael Law · Industrial Real Estate Broker, Lennard Commercial Realty

Anchored pallet racks in a Toronto warehouse aisle

If you are leasing a warehouse in Toronto or the GTA, assume your racking needs a building permit and a separate Pre-Start Health and Safety Review (PSR) before you load a single pallet. The permit comes from the municipality under the Ontario Building Code. The PSR comes from the province’s workplace safety rules. They are different requirements, owned by different people, and the lease decides who has to pay for and deliver each one. Settle that before you sign, not after the racking truck arrives.

This guide is for tenants and owners of industrial space: when a permit is triggered, what the application contains, what the PSR adds, what it costs in Toronto, and how to fold all of it into a lease or relocation timeline.

Michael Law | Lennard Commercial
Plan Warehouse Racking Before You Sign
Michael Law advises industrial tenants on site selection and lease negotiations across the GTA, including decisions that shape your warehouse plans.
Visit

TL;DR

  • Plan on a building permit for any relocation, new rack installation, major reconfiguration or tenant fit-up that includes racking. Confirm with your municipality, because Toronto, Oakville, Brampton and Barrie each run their own intake.
  • A PSR is a separate Ontario requirement. It applies when materials will be stored on a new, modified or re-purposed rack, unless you can document an exemption.
  • A typical application needs sealed rack drawings, a sealed slab letter, a life safety plan and a sprinkler review. Engineers produce these, so allow weeks, not days.
  • The building owner is ultimately responsible for permit compliance, so the lease should say who applies, who pays and who gives written owner authorization.
  • Negotiate permit and PSR timing into your possession date and free-rent period before you commit to a space.

Table of Contents

Why racking needs a permit in the first place

Steel pallet racking looks like equipment. The building code now treats it as part of the building. The 2024 Ontario Building Code took effect on January 1, 2025, and according to a Toronto-area racking supplier, the updates reinforced that storage racking is part of the built environment rather than industrial furniture. In plain terms: you are anchoring a structure to the slab, loading it with tonnes of goods and putting people in aisles beneath it.

A second source describes the same shift. Under the Ontario Building Code (O. Reg. 332/12), a building permit is required to construct or alter a building or structure, and the code classifies shelf and rack storage systems as self-contained structural systems under Part 3.16.1. That same article reports that Toronto, Oakville and Brampton treat new racking as a building alteration.

The code itself gives the rationale. OBC 2024 Section 3.16 governs shelf and rack storage systems and sets limits that a permit reviewer checks:

  • Racks are not permitted in high-hazard industrial occupancies.
  • Height is generally limited to 24 m, and rubber-tire systems are limited to 7 m.
  • Sprinklers are required under platforms and walkways, with waterflow notification.
  • A sign is required showing the commodity class and design criteria.
  • Egress provisions apply, including generally two exits per level, 45 m travel limits, 9 m dead-end aisles in specified cases and a 760 mm minimum clear aisle width.

Those are the items a plans examiner reads against your drawings. If your racking layout cannot meet them in the space you are leasing, you want to learn that during site selection, not during construction.

When you need a permit: the practical triggers

The research on Ontario practice points to the same short list of situations. Permit requests commonly arise for:

  1. A relocation. You move into a new building and install racking you did not have there before.
  2. A new rack installation. Even in a building you already occupy.
  3. A major reconfiguration. Raising rack height or changing the layout.
  4. A tenant fit-up. When interior alterations are underway, the rack permit is often pulled alongside the broader work.
  5. Rack-supported mezzanines or platforms. These add walkable area and bring in more code requirements.

The safe working assumption, as the 3D Storage Solutions guide puts it, is that a permit will be required for a relocation, fit-up or major installation unless the municipality confirms otherwise. Swapping a few beams like for like is a different conversation from adding two tiers. If you are unsure, ask the building department for a written answer and keep it with your lease file.

If racking is part of a larger build-out, see our walkthrough of GTA tenant fit-out planning and practical tenant improvement examples so racking, power, dock and office work share one schedule.

The permit and the PSR are two different approvals

This is where tenants get caught. The building permit is municipal. The PSR is provincial, and a permit does not replace it.

The Province’s Item 3 guideline on racks and stacking structures says a PSR is required whenever materials are to be placed or stored on a rack or stacking structure, unless an exemption is established. The triggers are:

  • a new rack installation,
  • a modification of an existing rack, or
  • a change in lift trucks or in load type or weight that departs from the original design parameters.

The guideline also states that a building permit may be required, but this does not override the PSR requirement or the need to establish an exemption. The paperwork overlaps, though: documentation prepared for a permit can form part of a PSR report or support an exemption.

RackedOut traces the PSR to Section 7 of Ontario Regulation 851, the Industrial Establishments Regulation, and notes that where it applies, the owner, lessee or employer must make sure the review is completed before the racking is used. For a tenant, that means the PSR is usually your obligation as the operator, even when the landlord owns the building.

How to qualify for the PSR exemption

The same guideline allows an exemption when you document that the rack is designed and tested to ANSI MH16.1-2012(R2019), the specification for industrial steel storage racks. You support that with:

  • a manufacturer statement,
  • capacity tables or charts,
  • structural drawings identifying all components and the assembly, and
  • safe installation and use instructions.

The exemption disappears if manufacturer load limits will be exceeded. The guideline also makes clear that a PSR looks at the parameters and type of load the rack is designed for, not your actual pallet loads. Keeping pallets stable and within those parameters stays with the employer, and the PSR author must consider your equipment: capacity, turning radius, and vertical and horizontal reach of the lift trucks.

That last point matters when you relocate. If your new building has different aisle widths or you are moving from counterbalance trucks to narrow-aisle reach trucks, the original design assumptions may no longer hold.

What a racking permit application contains

Submission requirements vary by municipality, but the pattern is consistent. A typical Ontario package includes sealed rack drawings, a sealed slab letter, a life safety and egress plan, a sprinkler review and an electrical review, plus municipality-specific items such as a letter of intended use or an OBC matrix, a summary table of code compliance for the project.

Key components of a racking permit application

Two municipal checklists show how this looks in practice.

Oakville. The Town’s shelf and rack storage system page lists the permit application authorization, a floor plan showing rack location, engineered drawings of the racking, engineered drawings of the concrete slab or foundation including connection details, mechanical drawings and a sprinkler layout where applicable, a commitment to general review and the fees. Development charges may apply if the system includes walkable area, and they must be paid before the permit is issued.

Barrie. The City’s ICI building permit checklist asks for an industrial racking layout and height, an OBC data matrix, a life safety drawing showing travel distances, fire separations and exit signage, structural drawings stamped by a professional engineer, and stamped sprinkler drawings with head details and hydraulic calculations for new or considerably modified systems. A property owner consent letter is required where applicable.

For Toronto itself, start with the City’s own building permit pages and confirm the submission list for your specific scope before engineers start work.

The slab letter deserves early attention

Racking concentrates heavy point loads on the floor. The engineer has to confirm that the slab can take them and that the anchors will hold. In older GTA buildings, slab thickness and condition are not always documented, so this is the document most likely to delay an application. Ask the landlord for any available slab information during lease negotiation, and have the rack supplier’s engineer review the building before you finalize a layout.

Rack base plates anchored into a concrete slab

Sprinklers and egress shape the layout

The sprinkler review is not a formality. Rack height, commodity class and in-rack or platform sprinklers all tie back to the design criteria on the sign OBC Section 3.16 requires. A layout that wins you 15% more pallet positions can fail on aisle width or travel distance. Run the life safety check before you commit to a rack count, because your pallet capacity is only real once the permit drawings pass.

What it costs in Toronto

The City of Toronto publishes its building permit fee schedule, effective January 1, 2026. It sets a minimum fee of $214.79 for all work and an hourly fee of $92.79 for examination and inspection. For Group F industrial occupancies, the schedule lists per-square-metre rates for new floor area:

Industrial building type (Group F) Fee per m²
Shell, under 7,500 m² (warehouses, self-storage) $12.37
Finished, under 7,500 m² $17.01
Shell, over 7,500 m² $10.02
Finished, over 7,500 m² $15.03

Those rates apply to construction of floor area. A racking-only alteration is assessed differently, so confirm the fee for your scope with the City. Fee schedules are revised each year, so check the live page for the year you apply.

The larger costs sit outside the permit fee: the engineer’s sealed rack and slab drawings, sprinkler design changes, installation and the PSR report. Budget for them in the same line as your fit-up allowance, and ask whether the landlord’s tenant improvement allowance can apply to them.

Who is responsible: landlord, tenant and the lease

The City states that failure to obtain required building permits can mean costly delays, legal action or removal of completed work, and that the building owner is ultimately responsible for compliance. The Raymond article adds that, in a warehouse, the landlord is the party exposed if work proceeds without a permit, that leases often put permitting for interior alterations on the tenant, and that municipalities require written owner authorization before a tenant can apply.

Put together, a clean lease clause covers four things:

  1. Consent. The landlord agrees in the lease to sign the owner authorization within a set number of business days of request.
  2. Responsibility. The tenant applies for and pays for the racking permit, or the landlord does so as part of base-building work.
  3. Information. The landlord provides existing drawings, slab details and sprinkler information.
  4. Timing. Possession, rent commencement and any free-rent period reflect the weeks a permit and engineered drawings actually take.

The fourth item is where tenants lose money. Rent that starts on possession while the racking sits unpermitted means paying for a building you cannot fully use. A tenant who negotiates rent commencement around permit approval protects the budget.

After install: inspections and records

The permit and the PSR get the racking into service. Keeping it in service is an ongoing job. Platform 1 describes a program built around routine monthly inspections by trained staff, an annual inspection by a qualified inspector, accessible records and a damage classification system. 3D Storage Solutions recommends the same monthly and annual rhythm, with extra reviews after forklift impacts, rack moves, load-profile changes or new handling equipment, and notes that a PSR does not cover damage inspection.

The practical point for a tenant: keep your PSR report, drawings, manufacturer documentation and inspection logs in one file, and hand a copy to whoever manages your lease. They matter at the next relocation, at renewal and at lease-end, when you may be asked about removal and floor restoration.

Build racking into the site search, not after it

Most racking problems are real estate problems that show up late. Clear height, column spacing, slab capacity, sprinkler design and dock layout determine how much racking a building can safely and legally hold. If your operation depends on a pallet count, test candidate buildings against it before you tour twice.

A short screening list:

  • Clear height and sprinkler type. Does the existing system suit the commodity class and rack height you plan?
  • Slab. Is thickness and load capacity documented?
  • Column grid and aisles. Will your lift trucks work in the layout, and do aisles meet egress limits?
  • Existing racking. If a prior tenant left racking in place, ask for its drawings and any prior permit or PSR records.
  • Landlord cooperation. How quickly will the owner sign authorizations and share drawings?

You can browse current industrial space for lease in Toronto with these questions in mind, or look at a large example such as 160 Carrier Drive 1 in Etobicoke, at 159,753 SF.

How we help industrial tenants with this

Our work covers tenant representation for industrial users, lease renewals and relocations, site selection and lease negotiation across Toronto and the GTA. That is where racking approvals are won: in the clauses on landlord consent, in the timing of rent commencement and in choosing a building whose specifications suit your racking plan. The full list of brokerage services includes warehouse, 3PL, cold storage, e-commerce fulfillment and other specialized industrial space, from relocations to purchases.

Michael Law | Lennard Commercial

If you are planning a move or a renewal and racking is part of the plan, talk to us before the offer to lease is drafted. Michael Law has over 15 years of experience and more than $2.5B in closed industrial transactions in Ontario, and he is also profiled on the Lennard Commercial team page.

Our view on racking and lease strategy

Racking is where an industrial lease meets an operating plan. Tenants usually negotiate rent, term and clear height with care, then treat racking as a detail for the move-in month. By then the leverage is gone.

Our approach starts with the operation. How many pallet positions does the business need, which equipment moves them, and what does the building have to provide? From there, we shortlist buildings against those answers and build the lease around them: landlord consent to permit applications, access to existing drawings, and a possession and rent schedule that allows for engineering and approvals.

We also push for clarity on who pays for what. Permit fees, sealed drawings, sprinkler modifications and the PSR can all fall into a grey area between base building and tenant work. Settling it in the offer is far cheaper than settling it in week eight of a stalled install.

Our experience across GTA submarkets, from Mississauga and Brampton to Vaughan and Markham, is that tenants who raise racking at the start of a search keep control of their timeline and their budget.

Michael Law

FAQ

Do I need a racking permit in Toronto?

You should assume so for a relocation, a new installation, a major reconfiguration or a fit-up that includes racking. The 2024 Ontario Building Code treats racking as a building structure, so the City of Toronto handles it as an alteration. Confirm your exact scope with the City’s building department before work starts.

Is a racking permit the same as a PSR?

No. The building permit is a municipal approval under the Building Code. The PSR is a provincial workplace safety review under Ontario’s Industrial Establishments Regulation. The Ontario guideline says a permit does not override the PSR, although permit documents can support it.

Who applies for the permit, the landlord or the tenant?

That depends on your lease. Many leases put permitting for interior alterations on the tenant, but the municipality requires written authorization from the building owner, and the owner is ultimately responsible for compliance. Put consent, responsibility and timing into the lease before you sign.

What documents do I need for a racking permit application?

Expect sealed rack drawings, a sealed slab letter, a life safety and egress plan, a sprinkler review and an electrical review. Municipalities add their own items, such as an OBC matrix, a floor plan showing rack location or an owner consent letter. Check your municipality’s current checklist.

How tall can warehouse racking be in Ontario?

Under OBC 2024 Section 3.16, shelf and rack storage systems are generally limited to 24 m, and rubber-tire systems to 7 m. Racks are not permitted in high-hazard industrial occupancies. Your building’s sprinkler system and egress layout will usually set the practical limit lower.

Sources

Michael Law

About Michael Law

Managing Partner and Industrial Real Estate Broker at Lennard Commercial Realty. Representing tenants and landlords across Toronto and the GTA for 15+ years. Michael specializes in GTA industrial real estate — connect with Toronto's leading industrial broker at mlawrealestate.com/industrial-broker-toronto.

Work with Michael →
Related Insights

More Toronto Industrial Real Estate Insights